• 学校首页
  • |
  • EN

近五年来,在IEEE Transactions on Industrial Electronics、IEEE Transactions on Automatic Control、Automatica、IEEE Transactions on Energy Conversion、IEEE Transactions on Vehicular Technology、IEEE Transactions on Communications、IEEE Transactions on Magnetics、中国科学等SCI、EI国内外权威期刊发表论文780余篇,其中SCI检索论文520余篇,高被引论文12篇,中科院一区期刊收录论文90余篇;申请国际PCT专利28件,授权国家发明专利510余件。

部分代表性论文:

1.Zhao W, Pan X, Ji J, et al. Analysis of PM Eddy Current Loss in Four-Phase Fault-Tolerant Flux-Switching Permanent-Magnet Machines by Air-Gap Magnetic Field Modulation Theory[J]. IEEE Transactions on Industrial Electronics, 2020, 67(7):5369-5378.

2.Zhao W, Du K and Xu L. Design Considerations of Fault-tolerant Permanent Magnet Vernier Machine[J]. IEEE Transactions on Industrial Electronics, 2020, 67(9):7290-7300.

3.Ding S, Chen W, Mei K, et al. Disturbance Observer Design for Nonlinear Systems Represented by Input-Output Models [J]. IEEE Transactions on Industrial Electronics, 2020, 67(2): 1222-1232.

4.Zhao W, Ma A, Ji J, et al. Multi-Objective Optimization of a Double-Side Linear Vernier PM Motor Using Response Surface Method and Differential Evolution[J]. IEEE Transactions on Industrial Electronics, 2020, 67(1): 80-90.

5.Chen Q, Xu G, Zhai, F, et al. A Novel Spoke-Type PM Motor With Auxiliary Salient Poles for Low Torque Pulsation[J].IEEE Transactions on Industrial Electronics, 2020, 67(6): 4762-4773.

6.Zhang L, Zhu X, Gao J, et al. Design and Analysis of New Five-Phase Flux-Intensifying Fault-Tolerant Interior-Permanent-Magnet Motor for Sensorless Operation[J]. IEEE Transactions on Industrial Electronics, 2020, 67(7): 6055-6065.

7.Zhu X, Jiang M, Xiang Z, et al. Design and Optimization of a Flux-Modulated Permanent Magnet Motor Based on an Airgap-Harmonic-Orientated Design Methodology[J]. IEEE Transactions on Industrial Electronics, 2020, 67(7): 5337-5348.

8.Chen Q, Yan Y, Liu G, et al. Design of a New Fault-Tolerant Permanent Magnet Machine With Optimized Salient Ratio and Reluctance Torque Ratio[J]. IEEE Transactions on Industrial Electronics, 2020, 67(7): 6043-6054.

9.Chen Q, Gu L, Lin Z, et al. Extension of Space-Vector-Signal-Injection-Based MTPA Control Into SVPWM Fault-Tolerant Operation for Five-Phase IPMSM[J]. IEEE Transactions on Industrial Electronics, 2020, 67(9): 7321-7333.

10.Zhang W, Yang H, Cheng L, et al. Modeling Based on Exact Segmentation of Magnetic Field for a Centripetal Force Type-Magnetic Bearing[J]. IEEE Transactions on Industrial Electronics, 2020, 67(9):7691-7701.

11.Liu G, Wang Y, Chen Q, et al. Multi-Objective Deterministic and Robust Optimization Design of a new Spoke-Type Permanent Magnet Machine for the Improvement of Torque Performance[J]. IEEE Transactions on Industrial Electronics, 2020, 67(12): 10202-10212.

12.Chen Q, Xu G, Liu G, et al. Reduction of Torque Ripple Caused by Slot Harmonics in FSCW Spoke-Type FPM Motors by Assisted Poles[J]. IEEE Transactions on Industrial Electronics, 2020, 67(11): 9613-9622

13.Zhang W, Cheng L, Zhu H. Suspension Force Error Source Analysis and Multi-dimensional Dynamic Model for a Centripetal Force Type-Magnetic Bearing[J]. IEEE Transactions on Industrial Electronics, 2020, 67(9): 7617-7628.

14.Wei M, Zhang Y, Li G, et al. A cell viability assessment approach based on electrical wound-healing impedance characteristics[J]. Biosensors and Bioelectronics, 2019, s 124–125: 25-32.

15.Wang Yang, Lai KX, Chen FY, et al. Shadow price based co-ordination methods of microgrids and battery swapping stations[J]. Applied Energy, 2019, 253.

16.Chen Q, Zhao W, Liu G, et al. Extension of Virtual-Signal-Injection-Based MTPA Control for Five-Phase IPMSM Into Fault-Tolerant Operation[J]. Industrial Electronics, IEEE Transactions on, 2019, 66(2): 944-955.

17.Zhu X, Fan D, Mo L, et al. Multiobjective Optimization Design of a Double-Rotor Flux-Switching Permanent Magnet Machine Considering Multimode Operation[J]. IEEE Transactions on Industrial Electronics, 2019, 66(1): 641-653.

18.Xu G, Liu G, Zhao W, et al. Principle of Torque-Angle Approaching in a Hybrid Rotor Permanent-Magnet Motor[J]. IEEE Transactions on Industrial Electronics, 2019, 66(4): 2580-2591.

19.Zhu X, Huang J, Quan L, et al. Comprehensive Sensitivity Analysis and Multiobjective Optimization Research of Permanent Magnet Flux-Intensifying Motors[J]. IEEE Transactions on Industrial Electronics, 2019, 66(4): 2613-2627.

20.Zhao W, Zhu J, Ji J, et al. Improvement of Power Factor in a Double Side Linear Flux-Modulation Permanent-Magnet Motor for Long Stroke Applications[J]. IEEE Transactions on Industrial Electronics, 2019, 66(5): 3391-3400.

21.Zhao W, Yang A, Ji J, et al. Modified Flux Linkage Observer for Sensorless Direct Thrust Force Control of Linear Vernier Permanent Magnet Motor[J]. IEEE Transactions on Power Electronics, 2019, 34(8): 7800-7811.

22.Du Y, Zhang C, Zhu X, et al. Principle and Analysis of Doubly Salient PM Motor With Π-Shaped Stator Iron Core Segments[J]. IEEE Transactions on Industrial Electronics, 2019, 66(3): 1962-1972.

23.Guo X, Zhang R, Yang N, et al. An approach for cell viability online detection based on the characteristics of lensfree cell diffraction fingerprint[J]. Biosensors & Bioelectronics, 2019, 124-125: 25-32.

24.Zhang R, Wei M, Chen S, et al. A Cell Viability Assessment Method Based on Area-Normalized Impedance Spectrum (ANIS)[J]. Biosensors & Bioelectronics, 2018, 110: 193-220.

25.Chen Q, Xu G, Liu G, et al. Torque Ripple Reduction in Five-Phase IPM Motors by Lowering Interactional MMF[J]. IEEE Transactions on Industrial Electronics, 2018, 65(11): 8520-8531.

26.Liu G, Zeng Y, Zhao W, et al. Permanent Magnet Shape Using Analytical Feedback Function for Torque Improvement[J]. IEEE Transactions on Industrial Electronics, 2018, 65(6): 4619-4630.

27.Zhang D, Liu G, Zhou H, et al. Adaptive Sliding Mode Fault-Tolerant Coordination Control for Four-Wheel Independently Driven Electric Vehicles[J]. IEEE Transactions on Industrial Electronics, 2018, 65(11): 9090-9100.

28.Zhou H, Liu G, Zhao W, et al. Dynamic Performance Improvement of Five-Phase Permanent-Magnet Motor With Short-Circuit Fault[J]. IEEE Transactions on Industrial Electronics, 2018, 65(1): 145-155.

29.Zhu X, Xiang Z, Quan L, et al. Multimode Optimization Design Methodology for a Flux-Controllable Stator Permanent Magnet Memory Motor Considering Driving Cycles[J]. IEEE Transactions on Industrial Electronics, 2018, 65(7): 5353-5366.

30.Zhu X, Xiang Z, Quan L, et al. Multimode Optimization Research on a Multiport Magnetic Planetary Gear Permanent Magnet Machine for Hybrid Electric Vehicles[J]. IEEE Transactions on Industrial Electronics, 2018, 65(11): 9035-9046.

31.Liu G, Lin Z, Zhao W, et al. Third Harmonic Current Injection in Fault-Tolerant Five-Phase Permanent-Magnet Motor Drive[J]. IEEE Transactions on Power Electronics, 2018, 33(8): 6970-6979.

32.Chen W, Xie X, Wang D, et al. Probabilistic Stability Analysis of Subsynchronous Resonance for Series-Compensated DFIG-Based Wind Farms[J]. IEEE Transactions on Sustainable Energy, 2018, 9(1): 400-409.

33.Chen X , Xu B , Mei C , et al. Teaching–learning–based artificial bee colony for solar photovoltaic parameter estimation[J]. Applied Energy, 2018, 212:1578-1588.

34.Ling Z, Ji J, Wang J, et al. Design Optimization and Test of a Radially Magnetized Magnetic Screw With Discretized PMs[J]. IEEE Transactions on Industrial Electronics, 2018, 65(9): 7536-7547.

35.Zhao W, Wu B, Chen Q, et al. Fault-Tolerant Direct Thrust Force Control for a Dual Inverter Fed Open-End Winding Linear Vernier Permanent-Magnet Motor Using Improved SVPWM[J]. IEEE Transactions on Industrial Electronics, 2018, 65(9): 7458-7467.

36.Zhao W, Chen Z, Xu D, et al. Unity Power Factor Fault-Tolerant Control of Linear Permanent-Magnet Vernier Motor Fed by Floating Bridge Multilevel Inverter With Switch Fault[J]. IEEE Transactions on Industrial Electronics, 2018, 65(11): 9113-9123.

37.Zheng J, Zhao W, Ji J, et al. Design to Reduce Rotor Losses in Fault-Tolerant Permanent-Magnet Machines[J]. IEEE Transactions on Industrial Electronics, 2018, 65(11): 8476-8487.

38.Zhao W, Jiao S, Chen Q, et al. Sensorless Control of a Linear Permanent-Magnet Motor Based on an Improved Disturbance Observer[J]. IEEE Transactions on Industrial Electronics, 2018, 65(12): 9291-9300.

39.Zhao W, Zheng J, Ji J, et al. Star and Delta Hybrid Connection of a FSCW PM Machine for Low Space Harmonics[J]. IEEE Transactions on Industrial Electronics, 2018, 65(12): 9266-9279.

40.Zhao C and Zhu H. Design and Analysis of a Novel Bearingless Flux-Switching Permanent Magnet Motor[J]. IEEE Transactions on Industrial Electronics, 2017, 64(8): 6127-6136.

41.Zhu X, Xiang Z, Zhang C, et al. Co-Reduction of Torque Ripple for Outer Rotor Flux-Switching PM Motor Using Systematic Multi-Level Design and Control Schemes[J]. IEEE Transactions on Industrial Electronics, 2017, 64(2): 1102-1112.

42.Zhu X, Shu Z, Quan L, et al. Design and Multicondition Comparison of Two Outer-Rotor Flux-Switching Permanent-Magnet Motors for In-Wheel Traction Applications[J]. IEEE Transactions on Industrial Electronics, 2017, 64(8): 6137-6148.

43.Ding S, Liu L and Zheng W. Sliding Mode Direct Yaw-Moment Control Design for In-Wheel Electric Vehicles[J]. IEEE Transactions on Industrial Electronics, 2017, 64(8): 6752-6762.

44.Xu L, Liu G, Zhao W, et al. Hybrid Stator Design of Fault-Tolerant Permanent-Magnet Vernier Machines for Direct Drive Applications[J]. IEEE Transactions on Industrial Electronics, 2017, 64(1): 179-190.

45.Liu G, Jiang S, Zhao W, et al. Modular Reluctance Network Simulation of a Linear Permanent-Magnet Vernier Machine Using New Mesh Generation Methods[J]. IEEE Transactions on Industrial Electronics, 2017, 64(7): 5323-5332.

46.Liu G, Wang J, Zhao W, et al. A Novel MTPA Control Strategy for IPMSM Drives by Space Vector Signal Injection[J]. IEEE Transactions on Industrial Electronics, 2017, 64(12): 9243-9252.

47.Zhou H, Zhao W, Liu G, et al. Remedial Field-Oriented Control of Five-Phase Fault-Tolerant Permanent-Magnet Motor by Using Reduced-Order Transformation Matrices[J]. IEEE Transactions on Industrial Electronics, 2017, 64(1): 169-178.

48.Ding S, Liu L, Zheng W. Sliding Mode Direct Yaw-Moment Control Design for In-Wheel Electric Vehicles[J]. IEEE Transactions on Industrial Electronics, 2017, 64(8):6752-6762.

49.Xu L, Liu G, Zhao W, et al. Hybrid Stator Design of Fault-Tolerant Permanent-Magnet Vernier Machines for Direct Drive Applications[J]. IEEE Transactions on Industrial Electronics, 2017, 64(1): 179-190.

50.Liu G, Jiang S, Zhao W, et al. Modular Reluctance Network Simulation of a Linear Permanent-Magnet Vernier Machine Using New Mesh Generation Methods[J]. IEEE Transactions on Industrial Electronics, 2017, 64(7):5323-5332.

51.Liu G, Wang J, Zhao W, et al. A Novel MTPA Control Strategy for IPMSM Drives by Space Vector Signal Injection[J]. IEEE Transactions on Industrial Electronics, 2017, 64(12): 9243-9252.

52.Zhou H, Zhao W, Liu G, et al. Remedial Field-Oriented Control of Five-Phase Fault-Tolerant Permanent-Magnet Motor by Using Reduced-Order Transformation Matrices[J]. IEEE Transactions on Industrial Electronics, 2017, 64(1): 169-178.

53.Zhao W, Zheng J, Wang J, et al. Design and Analysis of a Linear Permanent- Magnet Vernier Machine With Improved Force Density.[J]. IEEE Transactions on Industrial Electronics, 2016, 63(4): 2072-2082.

54.Xiang Z, Zhu X, Quan L, et al. Multilevel Design Optimization and Operation of a Brushless Double Mechanical Port Flux-Switching Permanent-Magnet Motor[J]. IEEE Transactions on Industrial Electronics, 2016, 63(10): 6042-6054.

55.Liu G, Qu L, Zhao W, et al. Comparison of Two SVPWM Control Strategies of Five-Phase Fault-Tolerant Permanent-Magnet Motor[J]. IEEE Transactions on Power Electronics, 2016, 31(9): 6621-6630.

部分代表性发明专利:

1.ZL201610537453.7.内置磁障式磁场增强型永磁无刷电机

2.ZL201610976553.X.一种少稀土永磁电机零序电流抑制控制系统及方法

3.ZL201610324255.2.基于设计变量分层的电机多目标优化设计方法

4.ZL201710803614.7.一种基于多运行工况的车用驱动电机的优化设计方法

5.ZL201811578809.7.一种永磁利用率高的外转子磁通切换电机

6.ZL201810623451.9.一种不对称混合少稀土永磁电机的转子结构

7.ZL201810938901.3.一种高转矩密度的混合永磁电机转子结构.

8.ZL201810263411.8.一种定转子双永磁游标电机的2D磁路剖分建模方法

9.ZL201711214319.4.一种新型五相表嵌式永磁同步电机的转矩解析方法

10.ZL201711188579.9.一种降低五相内嵌式永磁电机转矩脉动的方法

11.ZL201810223578.1.用于飞轮储能的无轴承无刷直流电机宽调速范围低转矩脉动抑制方法

12.ZL201810499822.7.一种调节永磁同步电机中永磁转矩和磁阻转矩电流角的方法

13.ZL201710371599.3.一种考虑磁阻转矩的转矩脉动最小容错控制方法

14.ZL201710145054.0.基于新型扰动观测器的永磁直线电机无位置传感器控制方法

15.ZL201610266744.7.一种简化的五相永磁电机的短路容错控制方法

16.ZL201610334836.4.多模式永磁电机及其最优功率分配控制方法

17.ZL201610053211.0.一种永磁转矩和磁阻转矩分离型电机及最优效率控制方法

18.ZL201511015905.7.一种水产养殖池塘全覆盖自动均匀投饲轨迹规划方法

19.ZL201610095261.5.一种水产养殖作业船自动导航路径跟踪方法

20.ZL201710 467123.X.一种多地隙自传向结构

21.ZL201510420140.9.一种基于人工标识的自动投饵作业船视觉导航方法

22.ZL201410066106.1.一种用于河蟹养殖的全自动水草清理机器船

23.ZL201510121607.X.一种太阳能自主移动式增氧系统

24.ZL201410469282.X.亚硝酸盐传感器

25.ZL201610129725.X.一种液芯光纤共振拉曼光谱在线检测亚硝酸盐方法

26.ZL201610555650.1.一种用于田间作业的高地隙履带行走设备

27.ZL201610555207.4.一种升降喷杆装置

28.ZL201610554393.X.一种高地隙无人驾驶智能履带喷雾机及控制方法